Install INF Update 4. These items enable or disable the onboard COM1 serial port, and to assign a port address. Before installing this mainboard, make sure jumper JP2 is under Normal setting. When the Save and Exit dialog box appears, press Y to save and exit, or press N to exit without saving. If you are adding an infrared port, connect the ribbon cable from the port to the IR header and then secure the port to an appropriate place in your system chassis.
| Uploader: | Tygozshura |
| Date Added: | 5 January 2004 |
| File Size: | 21.56 Mb |
| Operating Systems: | Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X |
| Downloads: | 92761 |
| Price: | Free* [*Free Regsitration Required] |
Performance is based on the processor design, the clock speed and system bus frequency of the processor, and the quantity of internal cache memory and external cache memory. Secure the expansion card bracket to the system chassis using the screw that held the slot cover in place.
If you have already changed the setup utility, press F10 to save those changes and exit the utility.
The game port connects a joystick or a MIDI device. Once any of the installation procedures start, software is automatically installed in sequence. SelfMonitoring, Analysis and Reporting Technology feature. This item enables or disables the USB 2. These default values are quite demanding and your system might not function properly if you are using slower memory chips or other low-performance components.
This item enables or disables the Infrared port, and assigns a port address. If you enable this item, the system can automatically resume if there is traffic on the network adapter.
Please contact your local supplier for more information about your purchased model. In the system chassis, remove a slot cover from one of the expansion slots and install the extension bracket in the opening.
If you are adding an infrared port, connect the ribbon cable from the port to the IR header and then secure the port to an appropriate place in your system chassis. Connect the cable to the appropriate connector. The Master device connects to the end of the cable.
Mercury Kob 845Gl Ndmx V1-2 Drivers
Install the DIMM module into the slot and press it firmly down until it seats correctly. Use the items below this one to set the date and time of the wake-up alarm.
Please rest assured that our RD department has already tested and verified these drivers. Align the memory module with the slot.
驱动程序下载: Kob gl Ndmx V Drivers
You need to follow the onscreen instructions, confirm commands and allow the computer to restart as few times as needed to complete installing whatever software you selected. The ReadMe brings you to the Install Path where you can find out path names of software driver. If you have two diskette drives installed and you enable this item, drive A becomes drive B and drive B becomes drive A. Load Setup Defaults If you enable this item, the system starts up more quickly be elimination some of the power on test routines.
ndmd Exit Highlight this item and press Enter to save the changes that you have made in the Setup Utility configuration and exit the program. Install INF Update 4. Jan — Dec Day: Click the ReadMe to bring up a screen, and then click the Install Path at 845vl bottom of the screen. You might need to do this to configure some hardware installed in or connected to the mainboard, such as the CPU, system memory, disk drives, etc. Take the following precautions while unpacking this mainboard and installing it in a system.
Mercury KOB GL User`s manual |
Push the latches on each side of the DIMM slot down. The manufacturer does neither represent nor warrant the contents hereof; and specifically disclaims any implied warranties of merchantability or fitness for any particular purpose. Select Item Shift F2: A software menu appears. Select the items that you want to setup by clicking on it the default options are recommended. The Application button brings up a software menu.
Press Enter after you have retyped it correctly.
Комментарии
Отправить комментарий